Start-up Inspection Of Food Vacuum Encrusting Machine

Update:27-05-2021
Summary:

  1. The food vacuum encrusting machine should be place […]

  1. The food vacuum encrusting machine should be placed horizontally on stable ground, and check whether the machine cover is in normal condition. 2. The power supply of the equipment should be used as specified in the manual. 3. The vacuum pump is the most critical part of the vacuum encrusting machine. Pay attention to whether the oil level in the pump is near the scale line.

  1. The food vacuum encrusting machine should be placed horizontally on stable ground, and check whether the machine cover is in normal condition.

  2. The power supply of the equipment should be used as specified in the manual.

  3. The vacuum pump is a key component of the vacuum encrusting machine. Pay attention to whether the oil level in the pump is near the scale line.

  4. The machine should be well-grounded.

  5. After connecting the gas source of the food vacuum encrusting machine, turn on the power, close the machine cover and observe whether the vacuum pump is operating normally. If the machine does not pump air, it is likely that the vacuum pump motor has reversed. This is a common problem. You only need to exchange any two wires in the three-phase power supply.

  After the above preparations are completed, adjust the required air extraction time, heating time, sealing time and cooling time, etc., and run the equipment to check whether the packaging and sealing effects of the goods are qualified.

0
Views: 169